Many people call the spark machine EDM, and some others call it wire EDM, which is confused due to various names, but they are all called spark machines, but because of their different processing methods, the environment is And other requirements are too high, so if you want the spark machine to work normally, you need to follow the following points.
1. Machine location and environmental requirements
- 1. The location of the machine tool should be far away from the source of vibration. It is also necessary to prevent the influence of direct sunlight and heat radiation, and avoid the influence of humidity and airflow.
- 2. In the environment where the equipment is used, there will be no dust and conductive material splashing, otherwise it will directly affect the machining accuracy and stability of the machine tool, causing unstable contact of electronic components, causing malfunctions, and affecting the equipment. The workplace must have adequate ventilation and ventilation, and a fire extinguisher must be installed.
2. Power requirements
- 1. Install the spark machine, the power supply voltage required for strict requirements.
- 2. If the operation exceeds the allowable range. In this way, it will damage the machine tool and also affect the efficiency and accuracy of processing.
- 3. In addition, the voltage fluctuation of the power supply must be within the allowable range and remain stable, otherwise the cnc system will not work normally.
3.Temperature conditions
- 1. Frequent use of the spark machine is installed in a special electrical processing workshop. The stability of the environment does not change much. Air conditioning is recommended.
- 2. When the spark can adapt to the temperature range of 5 to 35 ℃, the humidity is not more than 80%, high-precision processing is required, it should be installed in the workshop to use a constant temperature.
