The basic safety requirements of mechanical equipment in cnc machining are mainly that the layout of mechanical equipment is reasonable, which is convenient for operators to load and unload workpieces, observe processing, and remove debris. At the same time, Yaoyao is convenient for maintenance personnel to inspect and repair. The strength and rigidity of the parts and components of the mechanical equipment in cnc processing must meet the safety requirements, and the installation must be firm and not malfunction.
According to relevant safety requirements, the mechanical equipment in cnc machinined must be equipped with reasonable, reliable safety devices that do not affect the operation. E.g:
1. For the rotating parts and components in cnc processing, safety protection devices such as protective covers, protective baffles, and protective railings should be installed to avoid the occurrence of twisting.
2. For parts and components that can cause dangerous accidents such as overpressure, overload, overtemperature, overtime and overtravel in cnc processing, safety devices should be installed. Whenever a dangerous situation occurs, the safety device acts to eliminate the danger and prevent it. The accident happened.
3. When some actions in cnc processing need to warn or remind people, signal devices or warning signs should be installed.
4. For some parts and components that cannot be reversed in the cnc processing, interlocking devices should be installed. That is, a certain action must be performed after the previous action is completed, otherwise it will not be possible to perform the action. This will ensure that accidents will not occur due to the wrong sequence of actions.
Post a Comment
Note: Only a member of this blog may post a comment.